Az ATS1201E bővítőn időnként, valós ok nélkül 230V hiba (tápegység hiba) üzenet jelenik meg
A probléma akkor jelentkezhet, ha a bővítő modul AUX kimenetén levő eszközök terhelése minimális, 100mA alatti. A telepítői kézikönyv jelzi, hogy ebben az esetben 4 db 1K ellenállás párhuzamos bekötésével le kell zárni az AUX kimenetet. Ha ez a lezárás nem történik meg, akkor fordulhat elő a hiba. Azért javasolt a 4 db 1K ellenállás, mert így egy ellenálláson kb. 14mA áram folyik, ami kb. 0.2W teljesítményt jelent. Ezt elbírják a biztonságtechnikában leggyakrabban használt 0.5W-os ellenállások. Természetesen egy darab 240 ohmos (2W-os) ellenállást is használhatunk, szükség esetén ez a forgalmazótól is beszerezhető.
Figyeljen rá, hogy a melegedő ellenállások ne érjenek hozzá semmihez a bővítő dobozban.
From time to time 230V error (power supply error) messages on ATS1201E expander, without real reason
Problem may appear if the current consumption value of connected devices to AUX output is minimal, less than 100mA. Installer manual warns to use 4 pcs of 1K resistor (connected parallel way) in this case on AUX output. If these resistors are not installed, then this trouble message may appear. The reason of usage of 4 pcs 1K is the following: in this case in one resistor there is about 14mA current, which means about 0.2W power capacity. This is not problem for 0.5W capacity resistors, which are generally used in security systems. Of course you can use one piece of 240 ohm (2W) resistor as well, you can have it from distributor.
Please pay attention, that the warming resistors shouldn’t be in contact with anything in expander box.